922-20007052/1.2
47
M3 Sonar API Testing software dialog box - Testing page
Use the
Testing
page to write and execute a Command Script, then view the results in
the Test Execution Log.
How to open
Click the
Testing
tab in the M3 Sonar API Testing software.
Description
The
Testing
page allows you to make sure the M3 Sonar API is working as expected.
You can also save any script you create so that you can run the same test at a later date.
To delete a command, select the command in the
Command Script
pane, then click
Delete
. Clicking
Delete All
will remove all commands from the
Command Script
pane.
After creating your script, click the
Execute
button to send the API commands to the
Commands Port. You can abort script execution by clicking
Cancel
.
This page also allows you to display a sonar image so that you can verify operation of
the Sonar Head and verify that the M3 Sonar API is streaming IMB data.
