12
922-20007052/1.2
Sonar Processor
In this publication, the computer is referred to as the Sonar Processor. The Sonar
Processor contains the operational software, and offers the user interface that allows you
to control the M3 Sonar. It is a vital part of the M3 Sonar Multibeam sonar.
The Sonar Processor runs the M3 software that manages
communication with the Sonar Head, performs all
beamforming and image processing and presents the
sonar imagery. The Sonar Processor communicates
with the sonar through a standard Ethernet cable.
If you purchase a computer locally, make sure that
the chosen model meets the functional and technical
requirements. The computer must be designed for
rugged use, and the construction must be able to
withstand the vibrations and movements of a vessel.
Power supply
The Sonar Head requires a DC power supply to run.
Normally, the DC voltage is supplied in the location where the Sonar Head is mounted,
such as on a remotely operated vehicle (ROV). A test cable and power supply is available
for order as an accessory. The test power supply uses a 24 VDC switching power supply.
M3 Sonar API Instruction Manual
