Kongsberg Flexview, Reference Manual

Page: 41 / 160

922-20207001/1.0
39
Saving and retrieving images
With one click, you can capture an image of the sonar view — either with overlays
or without overlays.
Prerequisites
Open the
Preferences
dialog box to change the default save location, choose your own
filename, and add overlay text.
Procedure
1 Click the
Save image with overlay
button.
If you want to save the sonar view without overlays, click the
Save
image without overlay
button instead.
These buttons are located on the tool bar.
Note
A “Save As” dialog box will appear if you have checked the
Prompt User for
Filename
box in the
Preferences
dialog box.
2 Retrieve your images and view them.
a On the Windows Taskbar, click the
File Explorer
shortcut.
Alternatively, press
Win + E
to open the
File Explorer
.
b Click
This PC
.
c Navigate to C:\KML\Flexview_V0100\Images.
Alternatively, navigate to where you saved your images earlier.
d Open the images with your preferred image viewer..
Recording sonar data
You can record a sonar data sequence and save it in a time-stamped digital format. You
can also re-record data during playback to capture a smaller clip of the data set.
Prerequisites
• Open the
Preferences
dialog box to change the default save location, choose your own
filename, and add overlay text.
• Click
File
→
Recording Format
to choose between recording raw sonar data (to a
“.mmb” file) or recording beamformed sonar data (to a “.imb” file).
Procedure
1 Click the circular icon in the top-right corner of the sonar view to open the
Menu
Widget
.
Operating procedures