background image

Note

Kongsberg Maritime AS makes every effort to ensure that the information contained
within this document is correct. However, our equipment is continuously being
improved and updated, so we cannot assume liability for any errors which may occur.

Warning

The equipment to which this manual applies must only be used for the purpose for
which it was designed. Improper use or maintenance may cause damage to the
equipment or injury to personnel. The user must be familiar with the contents of the
appropriate manuals before attempting to install, operate or maintain the equipment.

Kongsberg Maritime AS disclaims any responsibility for damage or injury caused by
improper installation, use or maintenance of the equipment.

Copyright

E

2004 Kongsberg Maritime AS

The information contained within this document remains the sole property of
Kongsberg Maritime AS. No part of this document may be copied or reproduced in any
form or by any means, and the information contained within is not to be communicated
to a third party, without the prior written consent of Kongsberg Maritime AS.

Contact information

Support

:

[email protected]

Sales:

[email protected]

24 hrs support telephone:

+47 99 20 38 01

Strandpromenaden 50
P.O.Box 111
N-3191 Horten,
Norway

Summary of Contents for EM 3002



































Reviews: