Kongsberg EM 2040 MKII, Installation Manual

Page: 78 / 248

78
472405/A
Installing the HWS - MC330 - Desktop model
The MC330 computer is available as a rack model and a desktop model. Follow this
procedure to install the desktop model of the computer.
Prerequisites
A suitable location for the computer must be defined
prior to installation.
Note
Observe the compass safe distance.
Context
The components are exactly the same in the rack model and the desktop model.
The desktop model will fit on your desktop. It is very light and can easily be installed
almost anywhere on the ship.The cabinet has prepared holes for mounting the computer
to the table, if necessary.
The same method can also be used to install the desktop model in a 19 inch rack shelf.
This may be an option if the rack is not deep enough for the regular rack mounted model.
Procedure
1 Prepare the location and the necessary tools.
2 Observe the installation requirements.
a Depending on its physical properties, install the computer inside a console, in
a cabinet or 19” rack, or on a desk.
b Choose a position to fit the available cable lengths between the computer and
the other units it connects to.
c Make sure that enough space is made available for maintenance purposes.
d Make sure that adequate ventilation is available to avoid overheating.
e Make sure that the installation method allows for the physical vibration,
movements and forces normally experienced on a vessel.
Note
To allow future maintenance, you must mount the unit with its cables and connectors
available for easy access.
3 Make sure that the chosen location meets the installation requirements.
4 Provide ample space around the computer.
You must be able to reach and use the front and rear mounted connectors and on/off
switches. It is also important that you allow for easy access to all the computer
cables, and enough space for inspection, maintenance and parts replacement. If
KONGSBERG EM 2040 MKII Installation Manual