Kongsberg EM 2040 MKII, Installation Manual

Page: 71 / 248

472405/A
71
Approved anti-fouling paints
This is our list of approved antifouling paints for all transducer types. Always refer to
the manufacturer's documentation and data sheets for a complete procedure and for
relevant safety information.
Important
Do not paint the transducer with traditional hull plating paint. Use only the correct
type of approved paint specified.
Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer face.
Jotun
•
Manufacturer
: Jotun
•
Address:
P.O.Box 2021, N-3248 Sandefjord, Norway
•
Manufacturer’s website
: http://www.jotun.com
Products:
• SeaMate M
–
Primer
: Safeguard Universal ES
Apply 80 µm wet film thickness (50 µm dry film thickness).
–
Paint
: SeaMate M
Apply 250 µm wet film thickness (125 µm dry film thickness).
• SeaQuantum Ultra S
–
Primer
: Safeguard Universal ES
Apply 80 µm wet film thickness (50 µm dry film thickness).
–
Paint
: SeaQuantum Ultra S
Apply 250 µm wet film thickness (125 µm dry film thickness).
• Seaforce 200 AV
–
Primer
: Safeguard Universal ES AV
Apply 70 µm wet film thickness (50 µm dry film thickness).
–
Paint
: Seaforce 200 AV
Apply 140 µm wet film thickness (90 µm dry film thickness).
Data sheets and application guides can be downloaded from:
http://www.jotun.com/ww/en/b2b/technical-info/tds/index.aspx
Installing the transducer