Kongsberg EM 2040 MKII, Installation Manual

Page: 52 / 248

52
472405/A
Transducer orientation
Correct location, orientation and alignment of the transducers is important for the
performance of the system.
The two transducers are normally mounted as “T” or “L” configurations under the
vessel’s hull (Mills Cross configuration). The transmit transducer should be aligned
parallel to the vessel’s keel. The receive transducer should be aligned 90 degrees on the
keel. Both transducers should be horizontal on a plane on the keel.
Transducer default orientation
• Transmit transducer is mounted with cable connector on port side.
• Receive transducer is mounted with cable connector on forward side.
Transducer default orientation - Top view
Transducer default orientation - Bottom view
KONGSBERG EM 2040 MKII Installation Manual