Kongsberg EM 2040 MKII, Installation Manual

Page: 111 / 248

472405/A
111
Adapter for D-connector to RJ45 connector for RS-422
You can use an adapter if you need to connect a serial cable with a D-connector to the
Processing Unit.
The Processing Unit has four serial ports with RJ45 connectors. The ports can be
configured to be RS-232 or RS-422.
You can use an adapter if you need to connect a serial cable with a D-connector to the
Processing Unit. Two adapters and two standard Cat6 patch cables are provided with a
standard delivery.
The adapter has RJ45 female connector at one end and 9-pin male D-connector at the
other end. The wiring at the RJ45 side is fixed, and the wire ends have crimp contacts to
be placed in the desired position of the D-connector without any tools.
A
Local connection (Processing Unit)
RJ45 connector
B Standard patch cable
C
Adapter Part number 357235
Wired for RS-422
D
Standard RS-422 cable
E Connection on remote device
Cable layout and interconnections