Kongsberg cNODE MiniS LF, Instruction Manual

Page: 50 / 56

50
458122/B
SECTION 9: Physical and chemical
properties
The battery is solid with a hard surface. There is no risk for exposure to the chemicals
inside an undamaged battery during normal operation and transportation.
The battery is a solid and sealed unit. The battery cannot be opened to reveal the
individual cells.
For additional information about the cells inside the sealed battery pack, see the safety
data sheet provided by the cell manufacturer.
Cell manufacturer
•
Manufacturer
: Lithium Werks
•
Manufacturer’s website
: https://lithiumwerks.com/
SECTION 10: Stability and reactivity
The battery is stable. No specific handling requirements apply.
Avoid exposing the battery to fire or temperatures above 80 °C. Do not disassemble,
crush, short or install the battery with incorrect polarity. Avoid mechanical or electrical
abuse. Do not immerse in seawater or other high conductivity liquids.
The battery will release toxic fumes if burned or exposed to fire. Breaching of the
individual cell enclosure may lead to generation of hazardous fumes which again may
include extremely hazardous hydrofluoric acid (HF).
SECTION 11: Toxicological information
Acute oral, dermal and inhalation toxicity data are not available for this battery.
Risk of irritation occurs only if the battery is abused to the point of breaking the container
and opening it to reveal the individual cells. If this occurs, irritation to the skin, eyes
and respiratory tract may occur.
SECTION 12: Ecological information
Provided that the battery pack is disposed of according to local regulations and/or law, it
will not have any environmental impact.
cNODE MiniS LF Instruction Manual