Message explanations
385585/C
A-17
Possible
consequences:
The memory controller is set to check for ECC errors on every memory read
cycles, and on every write cycle an ECC check is generated. An ECC error indicates
a memory read error. The system will probably not function correctly.
Corrective
actions:
•
Check if PS Mode Wheel is set to 5 or D.
•
If it is, set the Mode Wheel back to normal (Default is "0"), and reboot.
•
If not, see the corresponding message for more information. ("ECC: Error
Correction Codes are disabled, status: xx"). Note the alarm/message texts,
describe the current operation executed and enclose this when delivering the
PS to Kongsberg Maritime Service for repair.
•
Contact Kongsberg Maritime Service if this does not solve the problem.
Enable thrusters in bow
Description:
This message will be reported if the system is in Auto Track High Speed mode and
the use of bow thrusters is necessary for the vessel to enter the track at the
required position/heading.
The reason may be that the combination of the present vessel heading relative to
the track and a low vessel speed makes it difficult to enter the track at the correct
position/heading.
Possible
consequences:
Difficult to maintain vessel heading.
Corrective
actions:
Enable bow thrusters to maintain heading/position/speed.
Erroneous quality data
Description:
This message is reported if the received quality data from a position reference
system is erroneous.
The position reference system reports an accuracy that is better than what is
theoretically possible.
The position reference system is rejected because the received data cannot be
trusted.
Possible
consequences:
The position reference system is rejected.
Corrective
actions:
Check the position-reference system.
Erroneous telegram type
Description:
This message is reported if the telegram received from the reference system is
erroneous. This may be caused by errors in the reference system setup/DP setup.
The data received does not match the configuration.
Possible
consequences:
The position-reference system will not be available.
Corrective
actions:
Check the position-reference system and its setup.
Check the position-reference system and its interface.
Summary of Contents for cJoy OT
Page 207: ...Message explanations A 86 385585 C...
Page 208: ...2015 Kongsberg Maritime...
