Kongsberg ACS500, Instruction Manual

Page: 31 / 148

Cable layout and interconnections
Connecting the y-split cable from the Subsea Control Unit
to the valve package
Purpose
This cable provides the signals from the valve package to
the SCU and back.
Procedure
1
Secure the cable on the structure for the valve package
so that they do not present a hazard to ROVs etc. Make
sure there is slack for moving parts.
2 Mount any protective covers necessary to prevent the
cables being damaged.
3 Connect the cable to the SCUs as indicated. Connect the other end to the valve
package.
This is cable ACS500/C10.
Connecting the interface cable from the Subsea Control Unit
to the valve package
Purpose
This cable provides the signals from the valve package to
the SCU and back.
1 Secure the cable on the structure for the valve package
so that they do not present a hazard to ROVs etc. Make
sure there is slack for moving parts.
2 Mount any protective covers necessary to prevent the
cables being damaged.
3
Connect the cable to the SCU as indicated. Connect the
other end to the valve package.
These are cables ACS500/C11 and ACS500/C12.
397128/C
29