![background image](http://html1.mh-extra.com/html/kompernass-0/wk-5-a1/wk-5-a1_operating-instructions-manual_1992066032.webp)
GB
IE
28
WK 5 A1
CAUTION
►
Ensure that there are no electric lines, water or heating pipes
installed at the proposed drilling location!
►
The supplied anchors are only suitable for mounting on
concrete or stone. Before starting the installation, please check
your installation location carefully for its suitability for the an-
chors. The assembly material must be suitable for the respective
location. If in doubt, consult a professional.
♦
Mark the drill holes
25
by holding the foot of the wall bracket at
the desired mounting location and marking the hole positions.
♦
Use a drill with a 6 mm drill bit to drill the required holes and
insert the plugs and insert the anchors
26
flush with the wall.
♦
Screw the wall bracket to the wall using the supplied screws
27
.
♦
Mount the camera with the tripod thread
21
on the tripod screw
22
and screw the camera a little way on (about three turns).
♦
Turn the camera in the desired direction and lock it with the locking
washer
23
.
♦
To move the camera into its final position, undo the two joint
wing screws
24
a little, position the camera and fix the position
by tightening the two joint wing screws.