background image

UAB KOMFOVENT we reserve the right to make changes without prior notice

V-C5.1_21-01

9

of anti-frost protection are available: cold air by-passing, or / and supply air fan speed reducing. 

For extremely low outdoor air temperature the duct mounted preheater is recommended. Counter 

cross flow heat exchanger is the mostly sensitive for low outside air temperatures, as the risk of 

frosting appears in the temperature range from 0 to -5 °C and below. Standard aluminium cross-flow 

plate heat exchanger has better features, as the risk of freezing appears only at -10 °C. The lowest risk 

and the highest resistance to cold outside air is a competitive feature of the rotary heat exchanger, 

as it is not freezing even at the temperatures of -30 °C if the humidity level of the air is appropriate.

1.6. VERSO Air Handling Units Composing Options

VERSO-S

VERSO-P/PCF

VERSO-R/RHP

R1

L1

R2

L2

 outdoor intake

 supply air

 extract indoor

 exhaust air

R1

Air handling unit inspection doors on the right; supplied airflow into room is on the bottom of the unit. 

L1

Air handling unit inspection doors on the left; supplied airflow into room is on the bottom of the unit. 

R2

Air handling unit inspection doors on the right; supplied airflow into room is on the top of the unit.

L2

Air handling unit inspection doors on the left; supplied airflow into room is on the top of the unit.

Summary of Contents for VERSO Pro P





















































Reviews: