11
UAB KOMFOVENT we reserve the right to make changes without prior notice
C6M2-19-03
3. MECHANICAL INSTALLATION
3.1. List of parts in the package
Before installing the unit, check for any missing parts. If something is missing from the list, contact the company that sold
the air handling unit.
1. Air handling unit.
6. Mounting bolts for brackets
3
.
2. Control panel C6.1 or C6.2
1
.
7.
Door
key
4
.
3. Control panel cable (connected to the unit).
8. User guide.
4. Supply air temperature sensor (B1).
9. Installation manual.
5. Unit suspension brackets
2
.
3.2. Installation site requirements
DOMEKT units are designed for installation in household or technical rooms with an air temperature of 0 °C to +40 °C,
relative humidity from 20% to 80% (non-condensing). It is recommended to install the air handling unit in a separate room or
in an insulated attic on a solid, level base with vibration damping mat. We recommend not to rest the unit against the wall to
prevent noise or vibration and accumulation of moisture or mould on the wall due to condensation.
It is forbidden to install DOMEKT air handling units outdoors. They are also not designed for ventila-
tion or dehumidification of humid premises (swimming pools, baths, car washes, etc.).
1
Depends on your order.
2, 3
Only for units to be mounted on the wall or ceiling.
4
Except
for R 300 V and CF 150 F units.
Summary of Contents for Domekt CF 200 V
Page 1: ...DOMEKT Installation Manual EN C6M automation ...
Page 2: ......
