16
UAB KOMFOVENT we reserve the right to make changes without prior notice
DOMEKT_C8_guide_21-07
EN
3.1.10. Advanced settings
To access the advanced settings, press and hold the SETTINGS button for 5 seconds.
5 s
Overview
Scheduling
TURN OFF
Settings
Menu
Temperature control
Fire dampers
Air quality control
Advanced settings
1
/ 2
Reset settings
Clean filters calibration
Komfovent Control
Advanced settings
2
/ 2
Connectivity
Reset settings
Control sequence
Temperature control
– select a method for temperature control
(see Chapter 2.1).
Air quality control
– here you can activate and set-up air quality
control which will be used in AUTO mode (see Chapter 2.5.2).
• Impurity control
– turning on/off an impurity control function. At
least one CO2 or VOC sensor must be connected to the controller
board to activate this function (see Chapter 2.5.2.). If ventilation
by a weekly schedule is required, this function must be turned off.
• Humidity control
– turning on/off a humidity control function.
Humidity control function requires a humidity sensor. If no humid-
ity sensor is connected to the controller board, sensor integrated
in a control panel will be used for this purpose (see Chapter 2.5.2.).
• Sensor 1
– specify the type of the sensor connected to a terminal
B8 (see “Installation Manual”). If this sensor is not available, select “None”.
• Outdoor humidity
– this option appears when one of the sensors is of RH type (humidity sensor). If any of the connected
sensors are installed in the outdoor air flow, specify which one. If none of the installed humidity sensors measure the
outside humidity, select “None”.
Air quality control
1
/ 2
Impurity control
On
Humidity control
On
Sensor 1
CO2
Sensor 2
RH
Outdoor humidity
None
Sensor 1
None
CO2
VOC
RH
Air quality control
1
/ 2
Impurity control
On
Humidity control
On
Sensor 1
CO2
Outdoor humidity
None
Minimum intensivity
0 %
Outdoor humidity
None
Sensor 1
Air quality control
1
/ 2
Impurity control
On
Humidity control
On
Sensor 1
CO2
Outdoor humidity
None
Minimum intensivity
0 %
Air quality control
2
/ 2
Maximum intensivity
70 %
Check period
2h
Temperature control
Supply
Temperature control
Temperatūros palaikymas
Tiekimas
Temperature control
Temperature control
Supply
Extract
Room
Balance
