C6-17-08
UAB AMALVA we reserve the right to make changes without prior notice
29
The ECO mode settings are preset at the factory, but the operation mode can be modified. This requires
push and hold for five seconds the ECO button in the initial start-up window. In the window that opens, you can
change the default settings.
2.4.5. AUTO mode
AUTO – an automatic operation mode when the unit is operating and changing the ventilation intensity based
on the chosen (pre-set) weekly operating schedule.
However, if at least one air quality sensor is connected to the air handling
unit, the AUTO key will activate the automatic air quality control function.
Then, the ventilation intensity is adjusted, not according to the schedule, but
according to the current air pollution in the room.
See more details in Section 2.4.6.3.
2.4.6. Menu
The settings menu consists of four points, where
you can view the relevant user information,
choose the operating schedule, change the set
-
tings or turn off the unit.
If to the air handling unit is connected the air
quality or humidity sensor, then the “Scheduling”
menu item will disappear and instead of it, you
will see “Air Quality”. See more details in Sec
-
tion 2.4.6.3.
Detailed information
Efficiency & consumption
Alarms
Energy counters
Overview
2.4.6.1. Overview
The user can view the main air handling unit settings in the start-up windows
(see Section 2.4.2.). However, all other information related to the operation
of the unit, as well as to malfunctions and efficiency states, is provided in a
detailed review of the menu item.
Detailed information
Supply flow
350 m
3
/h
1 / 3
Supply air temperature
21,9 °C
Extract air temperature
22,1 °C
Air temperature
16,6 °C
Water temperature
25,3 °C
Detailed information.
All temperature sensor readings, functioning of sepa
-
rate air handling unit elements and other detailed information is available in
this menu
Menu
Overview
Scheduling
Settings
TURN OFF
or
Menu
Overview
Air quality
Settings
TURN OFF
