4
Hot Water Storage Tank with Coil
WTB 220-400
Chapter 2 |
Construction
Vertical storage tanks with one coil of WTB Series
are pressure equipment, i.e. the pressure within the
storage tanks and coil are equivalent to the pressures
in the corresponding systems.
Storage tank is made of high quality steel and is
equipped with one helical coil that can simultaneous-
ly operate with independent heat source, e.g. a solar
heating system, fi replace with water jacket or central
heating boiler. In each version, the hot water tank is
protected against corrosion by ceramic coating and
insulated protective magnesium anode. Thermal in-
sulation of the tank is a specially selected insulation
that provides excellent thermal insulation properties
of all devices. Storage tanks have aesthetic plastic
housing, a temperature indicator, inspection opening
and connectors for mounting electric heating unit and
connecting the hot water circulation.
2 Construction
Fig. 2
Section of the WTB 220-400 storage tanks.
Fig. 3
Side view of the WTB 220-400 storage tanks.
FR1
Protective magnesium anode
UL1
Adjustable foot
UA1-2 Temperature sensor cover
XL54 Thermometer
XL35 Connector pipe for mounting electric heating unit
QQ1 Inspection opening
XL4
Hot water intake connector pipe
XL5
Hot water circulation connector pipe
XL8
Coil supply connector pipe
XL9
Connection of return line from the coil
XL3
Cold water supply connector pipe
XL4
XL5
UA1
XL35
QQ1
XL8
UA2
XL9
XL3
FR1
UL1
XL54
NOTE
All products are ready for the installation of
a heating unit containing an electric heater
with thermostat and thermal switch.