11
Hot Water Storage Tank with Coil
WTB 220-400
Chapter 6 |
Chapter 7 |
Chapter 8 |
Accessories and Spare Parts
Service
Recycling and disposal
Report any malfunctions in the buffer tank operation
to the authorized service centres.
7 Service
8 Recycling and
disposal
According to the Nathan Systems B.V. rules, the
products have been manufactured of high quality ma-
terials using the latest technologies and solutions that
do not endanger the environment.
When selecting materials, we took into account both
the possibility of reuse of materials (recycling) that
can be disassembled and separated from materials
unsuitable for recycling, as well as risks arising from
the processing of materials not intended to reuse.
The purchased device consists in more than 90 % of
parts that can be recycled and reused, so they are
safe for the environment and human health.
Table 4.
Heating units.
Table 5.
Protective anodes
Storage tank
model
Type
Heating
unit power
Connector
pipe dia
WTB 220
ME 0015
1,5 kW
1
¼
’’
ME 0020
2,0 kW
ME 0030
3,0 kW
ME 0040
4,0 kW
WTB 300
ME 1030
3,0 kW
1½”
ME 1045
4,5 kW
WTB 400
ME 1045
4,5 kW
1½”
ME 1030
3,0 kW
ME 1060
6,0 kW
ME 1090
9,0 kW
Storage tank
model
Connector
pipe dia
Anode type
A
min
WTB 220
1’’
Bar
ø26x950
980 mm
Chain
ø26x7
150 mm
¾”
Titanium anode
200 mm
WTB 300
1’’
Bar
ø26x950
980 mm
Chain
ø26x8
150 mm
¾”
Titanium anode
200 mm
WTB 400
1 ¼”
Bar
ø33x720
750 mm
Chain
ø33x5
150 mm
¾”
Titanium anode
400 mm
NOTE
The packaging, in which the product is deli-
vered, is made mainly of materials suitable
for recycling and utilization. After installa-
tion, you should ensure the proper disposal
of packaging in accordance with applicable
regulations.
Caution
The storage tank may only be repaired/servi-
ced by an authorized service since improper
repair can cause safety risks, and the loss of
product warranty.
Caution
In order to prevent damage to piping systems
and environmental pollution, the product sho-
uld only be disassembled and taken out of
service by appropriately qualified specialists.
Caution
At end-of-life, take care that the product and
all the equipment were disposed of in accor-
dance with applicable regulations.