BATTERY DISCONNECT SWITCH
k
k
CAUTION
• Do not operate the battery disconnect switch while the engine is running.
The large current generated by the alternator may burn the electric parts and cause a fire.
Operate the battery disconnect switch only when the engine is stopped.
• If the battery disconnect switch is turned to OFF position, fold the lever and secure it with a lock or
such.
If someone turns the switch to ON position carelessly, this is extremely dangerous.
NOTICE
• Keep the battery disconnect switch in ON position except the following cases.
• When the machine is stored for a long time (more than a month)
• When repairing the electrical system
• When performing electric welding
• When handling the battery
• When replacing the fuse, etc.
• Do not turn the battery disconnect switch to OFF position while the system operating lamp is lit.
If the battery disconnect switch is turned to OFF position while the system operating lamp is lit, the
data in the controller may be lost.
• If the battery disconnect switch is turned to OFF position, all the electrical system is cut out and the
functions of KOMTRAX stop.
In addition, the time information of the clock and the radio tuning information may be lost.
If the time information of the clock is lost, perform the setting again by referring to CLOCK ADJUST-
MENT (3-91) and HANDLE RADIO (3-270).
Battery disconnect switch (1) is on the rear left side of the ma-
chine.
Battery disconnect switch (1) is used to cut out the electricity
from the battery.
REMARK
Operate this switch while the system operating lamp (2) is not
lit.
OFF position
The current from the battery is cut off.
ON position
The current from the battery flows into the circuit.
Before starting the machine, be sure to set the switch to ON position.
REMARK
Immediately after the reverse rotation of the fan, power to the fan reverse solenoid is supplied for some time to
protect the hydraulic motor even if the starting switch is turned to OFF position.
Make sure that the fan has stopped, and turn the battery disconnect switch to OFF position.
SYSTEM OPERATING LAMP
NOTICE
Do not turn the battery disconnect switch to OFF position while the system operating lamp is lit.
If the battery disconnect switch is turned to OFF position while the system operating lamp is lit, the data
in the controller may be lost.
OPERATION
EXPLANATION OF COMPONENTS
3-139
Summary of Contents for WA600-8
