manualshive.com logo in svg

Komatsu WA470-6 2006, Operation & Maintenance Manual

The Komatsu WA470-6 2006 is a reliable and efficient wheel loader designed for heavy duty tasks. Make sure to download the free Operation & Maintenance Manual for this model from manualshive.com to ensure proper care and operation of your machine. The manual is essential for maximizing productivity and lifespan.

Share
Download
background image

6.4  Joystick steering system

Attachments, Options

6-14

WA470-6H – VEAM946100

Operation using joystick lever and operation using steering wheel

CAUTION

!

If the directional lever and joystick FNR switch are not at the
neutral position, the neutral interlock circuit makes it impos-
sible to switch the transmission directional control (when the
joystick ON/OFF switch is ON, it is switched from the direc-
tional lever to the joystick FNR switch; when the joystick ON/
OFF switch is OFF, it is switched from the joystick FNR
switch to the directional lever).

!

Do not use the joystick when traveling on public roads.

Select joystick operation or steering wheel operation according
to the work.

Steering using joystick

This is suited for continuous loading operations on jobsites with
ample space where the loading operation can be carried out with
a comparatively relaxed cycle time.

Because operations can be carried out with a small movements
and light operating effort, this is also suitable for reducing opera-
tor fatigue when operating continuously.

Steering using steering wheel

This provides excellent fine control and ability to travel straight,
so it is suitable for travel between jobsites and for load and carry
operations. In addition, it is also suitable for short cycle loading
operations because the upper part of the operator's body is sup-
ported by the steering wheel when frequently switching between
FORWARD and REVERSE.

Summary of Contents for WA470-6 2006









































































































































































































































































































































































































Reviews:

No comments

Related manuals for WA470-6 2006

Ditch Witch SK500 Operator'S Manual preview
SK500
Brand: Ditch Witch Pages: 75

Brands by name

Popular brands

Load more brands