Komatsu WA380-8, Operation & Maintenance Manual, Page: 152 / 432

1.
Select “Language Setting” on the “Monitor Setting” menu
screen, then press ENTER switch (1).
2.
Select the language to be displayed, then press ENTER
switch (1).
REMARK
This setting is held even if the starting switch is turned to OFF
position.
OPERATOR ID
You can check and change the “Operator ID” which is under identification on the “Operator ID” menu.
The “Operator ID” menu is not displayed when the operator identification function is disabled.
REMARK
Contact your Komatsu distributor for details of the method of setting, changing, or canceling the operator identi-
fication function.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITH SKIP
When the starting switch is ON and ID is inputted, the identified
ID is displayed in the column of “Operator ID” on the “Monitor
Setting” menu screen.
EXPLANATION OF COMPONENTS OPERATION
3-88