background image

• If water gets into the electrical system, electric devices will

cause  malfunctions,  and  the  machine  will  cause  error.  If
the  machine  cause  error,  it  may  move  unexpectedly  and
cause serious personal injury or death. When washing the
machine  with  water  or  steam,  do  not  allow  the  water  or
steam  to  come  into  direct  contact  with  electrical  compo-
nents.

• If  high-pressure  water  is  sprayed  directly  onto  camera,  it

may  cause  failure.  Defective  camera  cannot  monitor  sur-
rounding area. When cleaning, do not allow the high-pres-
sure water to get into camera directly, and wipe off any dirt
with soft cloth.

• When cleaning camera, if you stand on an unstable place, or take an unstable posture, you may fall and be

injured. Put proper stepladder or step on the level and firm ground, and clean the camera in secure posture.

PRECAUTIONS FOR INSIDE OPERATOR'S COMPARTMENT

• When entering the operator's compartment, always remove all mud and oil from the soles of your shoes.

If you operate the pedal with mud or oil affixed to your shoes, your foot may slip and this may cause a seri-
ous accident.

• Do not leave tools or machine parts lying around inside the operator's compartment. If tools or parts get into

the  control  devices,  it  may  obstruct  operation  and  cause  the  machine  to  move  unexpectedly,  resulting  in
serious personal injury or death.

• Do not stick suction pads to the window glass. Suction pads act as a lens and may cause fire.
• Do not use a cellular phone when driving or operating the machine. This may lead to mistakes in operation,

and may cause serious personal injury or death.

• Never bring any dangerous objects such as flammable or explosive items into the operator's compartment.

PROVIDE FIRE EXTINGUISHER AND FIRST AID KIT

Observe  the  following  precautions  to  prepare  for  action  if  any
serious personal injury or death or fire should occur.

• Be  sure  that  fire  extinguishers  have  been  provided  and

read the labels to ensure that you know how to use them
for the possibility of fires.

• Perform  periodic  inspection  and  maintenance  to  ensure

that the fire extinguisher can always be used.

• Provide a first aid kit in the storage point. Perform periodic

checks and add to the contents if necessary.

IF ANY PROBLEM IS FOUND

If  you  find  any  problem  in  the  machine  during  operation  or  maintenance  (noise,  vibration,  smell,  incorrect
gauges, smoke, oil leakage, etc., or any abnormal display on the warning devices or monitor), report to the per-
son in charge and take the necessary action. Do not operate the machine until the problem has been corrected.

PRECAUTIONS TO PREVENT FIRE

ACTIONS IF FIRE OCCURS

• Turn the starting switch to OFF position, and stop the engine.
• Use the handrails and steps to escape from the machine.
• Do not jump off the machine. There is the danger of falling and it may cause personal injury.
• The fume generated by a fire contains harmful materials which have a bad influence on your body when

they are inhaled.
Do not breathe the fumes.

,&

GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE

SAFETY

2-16

Summary of Contents for WA270-8
































Reviews: