Komatsu WA250PT-5H, Operation & Maintenance Manual

Page: 239 / 255

ATTACHMENTS, OPTIONS
Handling fork tool
6-3
Handling fork tool 0.
Explanation of components 0.
(1) Work equipment control lever
Work equipment lever 0.
Use this lever (1) to operate the lift arm and fork.
NOTICE
Do not use the FLOAT position when lowering the fork.
Position (a): RAISE
When the work equipment control lever is pulled further
from the RAISE position, the lever is stopped in this position
until the lift arm reaches the preset position of the kickout,
and the lever is returned to the HOLD position.
Position (b): HOLD
The lift arm and fork stop and remain in the same position.
Position (c): LOWER
Position (d): FLOAT
The lift arm moves freely under external force.
Position (e): TILT
When the work equipment control lever is pulled further
from the TILT position, the lever is stopped in this position
until the fork reaches the preset position of the positioner,
and the lever is returned to the HOLD position.
Position (f): DUMP