Komatsu WA250PT-5H, Operation & Maintenance Manual

Page: 131 / 255

OPERATION
Operation
Moving the machine (Directional, speed), stopping the machine
3-73
Moving the machine (Directional, speed), stopping the machine 0.
WARNING
Always remove the safety bar for travel operations. If it is not removed, the steering wheel cannot be
used for steering, and this may lead to serious damage or injury.
When moving the machine, check that the area around the machine is safe, then sound the horn
before starting.
Do not allow people to get near the machine.
Clear the machine's travel path of any obstacle.
Pay particular attention to the blind spot at the rear of the machine when traveling in reverse.
Moving the machine 0.
1. Check that caution lamp (1) is not lighted up.
2. Set the safety lock lever (2) to the FREE position.
3. Operate work equipment control lever (3) to set the work
equipment to the travel posture shown in the diagram on the
right.
Free
Lock
9EA044483A
27 cm
9JA04632-1