Komatsu WA100M-7, Operation And Maintenance Manual

Page: 189 / 304

Troubleshooting 4.1 Towing the machine
WA80M-7, WA100M-7 – VENAM03001
4-5
After towing:
1. Tip up the operator's cab.
For details see “Tipping up the operator's cab (5-3)”.
NOTICE
Observe the types of the valves: Version A or B
Version A
 Hold the valve (1) with a wrench.
 Loosen the lock nut (2) and screw out the threaded pin (3)
counter-clockwise by means of an Allen key all the way.
 Retighten the lock nut (2). Perform this task on both valves.
Version B
 Hold the valve (1) with a wrench.
 Loosen the lock nut (2) and screw the threaded pin (3) clock-
wise by means of an Allen key back in all the way.
 Retighten the lock nut (2). Perform this task on both valves.
2. Put the protective caps on the valves.
3. Tip down the operator's cab.
For details see “Tipping down the operator's cab (5-5)”.
3
1
2
1
3
2