Komatsu WA100M-7, Operation And Maintenance Manual

Page: 140 / 304

3.3 Operation Operation
3-70
WA80M-7, WA100M-7 – VENAM03001
6. Set the direction selector switch to the desired direction.
NOTICE
If the direction selector switch is set to the forward or reverse posi-
tion while the parking brake is engaged, an acoustic warning sig-
nal sounds.
7. Release the brake pedal and simultaneously depress the
accelerator pedal to start the machine.
Limiting the maximum speed
The speed regulator is used to adjust the maximum ground speed
of the machine in a continuous range from slow (dial at '0') to fast
(dial at '10').
1. Stop the machine.
2. Initially set the speed regulator to the lowest speed. To do so,
turn the speed regulator (1) all the way to the left stop ('0' posi-
tion).
3. Depress the accelerator pedal. The machine stays stationary.
4. Slowly turn the speed regulator to the right to increase the
speed to the desired speed.
5. The machine slowly starts moving and accelerates to the
speed that matches the setting on the speed regulator.
6. Lock the speed regulator against being adjusted unintention-
ally by moving the locking device (2) all the way to the right
stop.
NOTICE
Depending on the road surface, identical speed regulator settings
may result in different speeds.
G0010004
Position F = Forward
Position N = Neutral position
Position R = Reverse
G0070225
2
1