Komatsu WA100M-7, Operation And Maintenance Manual

Page: 125 / 304

Operation 3.3 Operation
WA80M-7, WA100M-7 – VENAM03001
3-55
Check engine oil level – add engine oil
NOTICE
Wait for at least 5 minutes after switching off the engine before
checking the engine oil level. The machine must be on level
ground.
1. Pull out the dipstick (1) and wipe off the oil with a clean cloth.
2. Fully insert the dipstick and pull out again after a moment. The
oil level must be between the (H) and (L) marks on the dip-
stick.
3. If the oil level is below the (L) mark, add engine oil through
the oil filler neck (2). See chapter “Fuel, lubricants, and cool-
ants; quantities (5-16)” for recommended oils.
NOTICE
Do not pour an excessive amount of oil into the oil filler neck!
4. Wait for three minutes and check the oil level again. Drain
some oil if the oil level is above the (H) mark. For details see
“Draining engine oil (3-56)”.
5. Close the oil filler neck (2).
2
1
WA80M-7
1
2
WA100M-7