Komatsu WA100M-7, Operation And Maintenance Manual

Page: 101 / 304

Operation 3.2 Descriptions of the individual elements
WA80M-7, WA100M-7 – VENAM03001
3-31
26. Starting switch
Use this switch to turn the engine on and off.
 (A) 'OFF' position
In this position the engine is turned off and it is possible to
remove the key. In the stop position, all functional circuits are
turned off.
 (B) 'ON' position
In this position, the pilot lamps are lit and the intake air pre-
heater is active. The functional circuits are turned on. The
ignition key remains in this position while the engine is run-
ning.
 (C) 'START' position
With the switch in this position, the engine starts.
NOTICE
Starting the engine is possible only when the direction selector
switch is in the neutral position, 'N'.
27. Cigarette lighter
This is used to light cigarettes.
A few seconds after pushing the button in, it will return to its orig-
inal position. Then you may pull it out and light a cigarette.
28. Speed regulator
(Option)
The speed regulator is used to adjust the maximum ground speed
of the machine in all gears within a continuous range from slow
(dial at '0') to fast (dial at '10').
Turn the dial to the right to increase the setting. Turn the dial to
the left to decrease the setting. The conditions for use may differ
according to the condition of the road surface.
A B
C
G0070421A
GK032135
G0070225