![Komatsu PW98MR-10 Operation & Maintenance Manual Download Page 278](http://html1.mh-extra.com/html/komatsu/pw98mr-10/pw98mr-10_operation-and-maintenance-manual_1991292278.webp)
HANDLE RADIO
• To ensure safety, always keep the sound to a level where it is possible to hear outside sounds during opera-
tion.
• If water gets into the speaker case or radio, it may lead to an unexpected failure, so be careful not to get
water on the equipment.
• Do not wipe the display or buttons with solvent such as benzene or thinner. Wipe with a dry soft cloth.
• When the battery disconnect switch is turned to OFF position or the power for the machine is off at the re-
placement of the battery, the clock may be initialized. In such a case, set it again.
For handling of the battery disconnect switch, see “BATTERY DISCONNECT SWITCH (3-121)”.
RADIO MUTE SWITCH
The switch is located on the right joystick and is used for tem-
porarily switching off the radio and to put it in mute mode.
Keeping it pressed mutes the radio until it is released.
STOW ANTENNA
Before transporting the machine putting it inside a building, store the antenna to prevent any interference.
1.
Loosen antenna mounting bolt (1) and store the antenna at
position (A).
2.
After storing the antenna, tighten bolt (1).
RKA48501
HANDLE RADIO
OPERATION
3-210
WENAM00061
Summary of Contents for PW98MR-10
