manualshive.com logo in svg

Komatsu PW160-7K Series, Operation And Maintenance Manual

The Komatsu PW160-7K Series is a versatile and efficient hydraulic excavator designed for heavy-duty operations. Ensure optimal performance and longevity of your machine with the comprehensive Operation And Maintenance Manual. Download this essential manual for free at manualshive.com, to unlock valuable insights and instructions for safe and efficient operation.

Share
Download
background image

OPERATIONS AND CHECKS BEFORE STARTING ENGINE

OPERATION

176

STOPPING & PARKING

WARNING

●

Avoid stopping suddenly. Give yourself ample room
when stopping.

●

If the control lever is touched by accident, the work
equipment or the machine may move suddenly, and this
may lead to a serious accident. Before leaving the opera-
tor’s compartment, always raise the safety lock lever to
LOCK the work equipment controls.

●

In certain conditions it may be possible for the safety
lock lever to contact the left hand arm rest on the opera-
tor seat.
to avoid this, always ensure that the left hand arm rest is
stowed in the fully up position before operating the
safety lock lever.

●

When parking the machine, select flat hard ground and
avoid dangerous places. If it is unavoidable to park the
machine on a slope, insert chocks underneath the
wheels. As an additional safety measure, thrust the
bucket into the ground.

●

Before travelling re-apply the swing brake

●

Do not latch the brake pedal when moving

1.

Release the travel pedal (30) and depress the service brake
pedal (29) to stop the machine. (The service brakes may be
locked by fully de-pressing the service brake pedal until it
‘latches’)

29

30

30

29

32

Forward
Neutral

Reverse

Right 

control
lever

Summary of Contents for PW160-7K Series







































































































































































































































































































































































Reviews:

No comments

Related manuals for PW160-7K Series

Harmar Mobility Ascent DW100 Manual preview
Ascent DW100
Brand: Harmar Mobility Pages: 28
XCMG XE210C Operating & Maintenance Manual preview
XE210C
Brand: XCMG Pages: 154
Garbin TZ S Use And Maintenance Instructions preview
TZ S
Brand: Garbin Pages: 70
New Holland E385 Workshop Manual preview
E385
Brand: New Holland Pages: 41
OLEO LB 16 Installation Manual preview
LB 16
Brand: OLEO Pages: 12

Brands by name

Popular brands

Load more brands