Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 87 / 462

If there is any error existing, “!” is displayed on top of switch F5.
Press switch F5 to check the detail of the error. Current abnor-
mality screen is displayed.
KomVision
k k
WARNING
• Physically make sure the adjacent safety around the machine. Do not make sure with just the moni-
tor images.
• The work equipment will always show on the top of the monitor screen, regardless of the turret rota-
tion in relation to the lower body. Be aware of the direction of the machine.
KomVision is the CCTV system for Komatsu machines.
Precautions
• The cameras of the KomVision must be adjusted when the field of view shown by the display no longer
complies with the calibration specifications. For details concerning this control, see “CAMERA VISIBILITY
CONTROL METHOD”. If the image requires adjustment, contact a Komatsu distributor.
• The monitor image may not be visible because of snow, fog, rain, dust, or insufficient light.
• Obstacles positioned above the camera are not displayed. Pay attention not to hit any obstacles, for exam-
ple, larger work equipment of the machine, or tree branches.
• The reference line is calibrated for flat ground. The distance of the reference line is not correct on slopes or
rough ground.
KomVision OPERATION
Komvision provides a Bird’s eye view display of the machine with composite images from three onboard cam-
eras to create a 270 ° view of the machine.
OPERATION EXPLANATION OF COMPONENTS
3-15
WENAM00130