Komatsu PW118MR-11, Operation & Maintenance Manual, Page: 170 / 462

AUTOCRUISE SWITCH
NOTICE
The “Autocruise” switch should only be used when travelling long stretches of roads. Never operate the
switch before moving the machine. Do not use it on roads obstructed with snow or icy roads or inside
building sites.
This switch is used for keeping a steady speed when moving along long stretches of road.
Activation is only possible in certain conditions:
• parking brake released
• brake pedal released
• forward travel selected
• lever locking the controls lowered in the FREE position
• drive pedal pressed.
This is a switch with automatic return to a central position.
To activate the function press the drive pedal all the way down
to reach the maximum travel speed set by the hand throttle and
press the direction switch (a).
The light (c) comes on and the drive pedal locks in place.
To deactivate the system just press the brake pedal or put the
switch to direction (b).
The light (c) switches off and the drive pedal releases and can
be used normally.
For more details, see “METHOD FOR TRAVELING ON ROAD
(3-191)”
DIRECTION INDICATOR SWITCH
The steering column switch is used to indicate left and right
turns.
Push the lever forward (a) to signal right, pull the lever back-
ward (b) to signal left.
When the steering column switch is used, the indicator (c) on
the LED panel flashes
WINDOW WASHER SWITCH
The windscreen washers switch is used for spraying the wash-
ers.
Push the sleeve of the lever towards the steering column.
RKA48370
RKA48380
RKA48400
EXPLANATION OF COMPONENTS OPERATION
3-98
WENAM00130