Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 167 / 462

CHECK MESSAGE
1.
On the standard screen, press switch F6.
When there is any message, message display (1) lights
up.
While message display (1) is lit, press switch F6, and mail
confirmation menu (e) directly opens.
2.
Select mail confirmation menu (e), and you can read the
arrived message.
3.
If a message requests reply, the “Numeric Input:”“ []” box
(2) is displayed at (e) of the mail confirmation menu. Make
a reply to the message.
REMARK
• (3) is the subject of the received message. When no
message is received, “No message” is displayed in
place (3). is displayed.
• (4) is the serial number of received messages.
REPLY TO MESSAGE
1.
When replying to a message, input the selected item num-
ber in “Numeric Input: []” box (2) on the screen of mail con-
firmation menu (e). The selected item number is written in
place (5) of the message text.
• Input the number by using the monitor panel switch.
Each switch corresponds to the value shown on the
right side below the switch.
• If you input an incorrect number, press switch F5, and
you can clear an input character at a time.
• If switch F5 is pressed when the input column is blank,
the screen returns to the standard screen.
2.
After inputting a selected item number, press switch F6.
3.
When the message “Do you send Numeric Input?” is dis-
played in the column (2) of the mail confirmation menu
screen, press switch F6 again. The input value will be sent
out.
When the message “Do you send Numeric Input?” is dis-
played, if you press switch F5, the screen returns to the
screen for replying to message. At this time, the previous
input value will be cleared.
RKA61501
RKA62740
RKA62741
OPERATION EXPLANATION OF COMPONENTS
3-95
WENAM00130