Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 126 / 462

(J) Switch F3: To move to the next item (forward) (When the
last line is reached, it moves to the first line.)
(K) Switch F4: To move to the previous item (back) (When the
first line is reached, it moves to the last line.)
(L) Key F5: Cancels any change and returns the screen to the
previous screen.
(M) Key F6: Enters the selection and contents to change, and
advances the display to the next screen.
REMARK
• Even if the guide icons are the same, the display positions and the function keys may differ.
• For the guidance icons and their functions not explained previously, see the pages where the control meth-
ods of respective screens are explained.
WORKING MODE SELECTOR SWITCH
Use working mode selector switch to set the movement or pow-
er of the work equipment.
The operation becomes easier by selecting the mode to match
the content of the operation.
P mode: Heavy-duty operations
E mode: For operations with emphasis on fuel consumption
L mode: For fine control operations
B mode: For breaker operations
ATT/P mode: For operations emphasizing fuel consumption out
of those of 2-way attachments like crusher (machines ready
for installation of attachment)
ATT/E mode: For operations emphasizing fuel consumption out
of those of 2-way attachments like crusher (machines ready
for installation of attachment)
• When the monitor is turned ON, it is automatically set to
the mode used when the starting switch was turned to
OFF position last.
• When the working mode selector switch is pressed, the
working mode selector screen is displayed on the monitor.
For each set mode, “P”, “E”, “L”, “B”, “ATT/P”, and “ATT/E” are displayed at the top right of the monitor dis-
play.
• For machines ready for installation of attachment, the attachment mode is added to the display.
If you want to have automatic setting of P, E, L, B, ATT/P or ATT/E mode (optional default setting) when starting
engine, ask your Komatsu distributor to change the setting.
RKA48131
RKA48141
RKA61220
EXPLANATION OF COMPONENTS OPERATION
3-54
WENAM00130