Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 83 / 462

BASIC OPERATION OF MACHINE MONITOR WHEN STARTING ENGINE WHILE
ENGINE SHUTDOWN SECONDARY SWITCH IS ON
While engine shutdown secondary switch (1) is ON (engine is
stopped), when the starting switch is turned to ON position, the
screen shown in the figure is displayed and engine does not
start.
If engine shutdown secondary switch (1) is turned OFF (nor-
mal), the machine monitor switches to the standard screen,
and the engine can be started with usual starting switch key
operation.
For the function and operating method of engine shutdown sec-
ondary switch (1), see “ENGINE SHUTDOWN SECONDARY
SWITCH (3-108)”.
BASIC OPERATION OF MACHINE MONITOR WHEN STOPPING ENGINE IN NOR-
MAL SITUATION
RKA61010
When the starting switch is turned to OFF position, end screen JJ or KK is displayed for 5 seconds, then the
display goes out.
End screen when any message has been received
If there is any message from your Komatsu distributor, it is dis-
played on the end screen.
In this case, turn the starting switch to ON position to re-check
the message, and if it is the message requesting response,
send back your reply.
For the method of displaying and replying KOMTRAX messag-
es, see “MESSAGE DISPLAY (3-94)”.
RKA51870
OPERATION EXPLANATION OF COMPONENTS
3-11
WENAM00130