Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 456 / 462

Inducement strategy when the DEF tank Level be-
comes low....................................................3-138
Initial 250 hours maintenance (only after the first 250
hours).............................................................4-14
Initial 50 hours maintenance (only after the first 50
hours).............................................................4-14
Initial 500 hours maintenance (only after the first 500
hours).............................................................4-14
Inside operator's compartment............................. 2-20
Inspecting machine............................................... 2-19
Install attachment..................................................6-19
Introduction............................................................. 1-8
Investigate and confirm jobsite conditions............ 2-27
K
KCCV filter element - Replace.............................. 4-72
KCCV hose - Replace...........................................4-81
Keep machine clean............................................. 2-20
Keep work place clean and tidy............................ 2-41
Komatsu Closed Crankcase Ventilation (KCCV) 3-132
Komatsu genuine lubricants....................................4-2
Komatsu genuine replacement parts...................... 4-2
KOMTRAX.......................................................... 3-148
KomVision.............................................................3-15
KomVision - Operation..........................................3-15
L
Language settings.................................................3-90
Leveling work...................................................... 3-208
Lifting capacity........................................................ 5-5
Lifting of personnel prohibited...............................2-23
Lifting operation by using bucket with hook.......... 2-38
Lifting operation by using lifting device................. 2-39
Light switch for travelling on roads........................3-99
Loading and unloading with trailer...................... 3-232
Loading work.......................................................3-208
Location of engine number plate...........................1-12
Location of product identification number (PIN)/
machine serial No. plate................................ 1-12
Location of safety labels......................................... 2-3
Lock.................................................................... 3-214
Lock lever............................................................ 3-111
Lock lever automatic lock release pilot lamp........ 3-37
Lock lever automatic lock release switch............3-107
Locking inspection covers.......................................4-3
Long-term storage.................................................6-18
Lubrication chart..................................................... 7-5
M
Machine - Check walk-around............................ 3-150
Machine - Escape from mud............................... 3-206
Machine - Lift...................................................... 3-237
Machine - Load................................................... 3-233
Machine - Operate when working mode is not in
breaker mode.................................................6-16
Machine - Park....................................................3-213
Machine - Running-in the new machine..............3-177
Machine - Start after long-term storage.............. 3-241
Machine - Startup (forward and reverse travel) / Stop.
.....................................................................3-188
Machine - Stop....................................................3-190
Machine - Swing................................................. 3-195
Machine - Unload................................................3-235
Machine - Warm-up operation.............................3-185
Machine equipment name.......................................3-2
Machine monitor - basic operation when a fault oc-
curs while operating the machine.................. 3-14
Machine monitor - Basic operation when starter
switch is ON and the operator ID input is set.3-12
Machine monitor - Basic operation when stopping en-
gine in normal situation.................................. 3-11
Machine monitor - Basic operation, when the starting
of the engine is abnormal.............................. 3-13
Machine monitor - Basic operation, when the starting
of the engine is normal.................................. 3-10
Machine monitor - Operate when operator identifica-
tion function is available with skip..................3-91
Machine monitor - Operate when operator identifica-
tion function is available without skip.............3-93
Machine monitor equipment name..........................3-7
Machine operations and controls........................ 3-150
Machine ready for installation of attachment - Handle.
.........................................................................6-9
Machine settings................................................... 3-78
Magazine box......................................................3-124
Main use of machine...............................................1-8
Main windscreen wiper switch.............................. 3-99
Maintenance during long-term storage............... 3-241
Maintenance interval for hydraulic breaker........... 4-12
Maintenance of air conditioner..............................2-49
Maintenance procedure........................................ 4-14
Maintenance schedule.......................................... 4-11
Maintenance schedule table................................. 4-11
Maintenance screen - Set..................................... 3-83
Maintenance time caution lamp............................ 3-29
Manual operation - Start..................................... 3-225
Manual operation - Stop......................................3-226
Message - Check.................................................. 3-95
Message - Reply................................................... 3-95
Message display........................................... 3-36,3-94
Meter display.........................................................3-39
Method for adjusting........................................... 3-162
Method for checking before starting....................3-151
Method for lifting objects with lifting device.........3-209
Mirrors - Adjustment............................................3-165
Monitor settings.....................................................3-85
Monitor switches................................................... 3-52
N
No jumping on or off machine............................... 2-23
No people on attachments.................................... 2-23
Noise.......................................................................1-5
INDEX
8-4
WENAM00130