Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 364 / 462

1.
Open the cover (1).
2.
Pull out dipstick (2).
3.
Wipe off the oil from the dipstick with a cloth.
4.
Fully insert dipstick (2) into the dipstick pipe, then remove
it.
5.
Check the oil level with dipstick (G).
The oil level should be between H and L marks on the dip-
stick.
6.
If the oil level is below L mark on dipstick (G), add oil
through the hole for the dipstick.
7.
If the oil level is higher than H, decrease it to a proper level
according to the following procedure.
1) Place the oil container to catch the oil under the plug
(3).
2) Loosen drain valve (3) and drain excessive oil.
3) Check the oil level again.
8.
After checking the oil level or adding oil, insert the dipstick
(2) into the hole.
DRIVE SHAFT LUBRICATION METHOD
1.
Clean the grease nipples carefully.
RKA65030
RKA65230
RKA65240
MAINTENANCE PROCEDURE MAINTENANCE
4-36
WENAM00130