Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 270 / 462

HANDLE WORKING MODE
METHOD FOR SELECTING WORKING MODE
Use working mode selector switch (1) to select the working
mode that matches the operating conditions or purpose. This
will make it possible to perform operations efficiently.
Use the following procedure to select the most efficient working
mode.
When the starting switch is turned on, the working mode is set
to the mode that was in operation when the starting switch was
last turned off.
Use the working mode selector switch to set the mode to the
most efficient mode to match the type of work.
Working mode Applicable operations
P mode
Normal digging or loading operations
(production conscious operation)
E mode
Normal digging or loading operations
(Fuel consumption conscious operation)
L mode
Alignment or lifting operations (fine control
operation)
Mode B Operations with the hammer
ATT/P mode
Operations of double-acting attachment on
crusher
(production conscious operation)
ATT/E mode
Operations of double-acting attachment on
crusher
(Fuel consumption conscious operation)
NOTICE
If breaker operations are performed in a mode other than the breaker mode, there is danger of breakage
of the hydraulic equipment. Do not perform breaker operations in any mode except the breaker mode.
1.
Hold down working mode selector switch (1).
The screen changes to “Working Mode” screen.
RKA48800
RKA48800
MACHINE OPERATIONS AND CONTROLS OPERATION
3-198
WENAM00130