Komatsu PW118MR-11, Operation & Maintenance Manual

Page: 195 / 462

4) Turn lock (2) 90° counterclockwise to LOCK position
(L) to fix the upper side of the glass.
NOTICE
When stowing the window, block it securely and
check that no play is present. If there is play or if
the lock is not correctly inserted, the window may
fall.
5) When removing the bottom window from the stowing
position, perform the stowing procedure in the reverse
order.
SLIDE DOOR
k k
CAUTION
• Make sure that the sliding door is locked both when
open and when closed.
• Always stop the machine on a level surface when
opening or closing the door.
Avoid opening or closing the door on a slope, since
there is a danger that the operating effort may sudden-
ly change.
• Be careful not to get your hands caught between the
front pillar or center pillar.
• If there is anyone inside the cab, always call out a
warning before opening or closing the door.
To open the door, pull back the handle (1) and direct the door to the rear of the cab.
To close the door, pull back the handle (1) to manoeuvre the lock (2) and direct the door to the front of the cab.
EMERGENCY ESCAPE HAMMER
k k
CAUTION
• If it is necessary to break the window glass with the hammer, be extremely careful not to get injured
with scattered pieces of broken glass.
• To prevent injury, remove the broken pieces of glass remaining in the frame before escaping
through the window. Be careful also not to slip on the broken pieces of glass.
If it should become impossible to open the cab door for any
reason, and it is necessary to make an emergency escape
from the operator's compartment, use hammer to escape.
RKA63080
OPERATION EXPLANATION OF COMPONENTS
3-123
WENAM00130