Komatsu PC80MR-5E0, Operation & Maintenance Manual

Page: 226 / 412

4.
Set the lock lever (6) to LOCK position (L).
5.
Check that the machine monitor (7) is in the following
states.
(8) Engine coolant temperature gauge
The graduation of gauge is within normal range.
(9) Fuel gauge
The graduation of gauge is within normal range.
(10) Caution lamp display
OFF
If any problem is found, perform maintenance or repair.
6.
Stop the engine.
METHOD FOR CHECKING AFTER FINISHING WORK
Perform it after stopping the engine.
1.
Walk around the machine and check the work equipment, machine exterior, and undercarriage, also check
for any leakage of oil or coolant. If any problems are found, repair them.
2.
Fill the fuel tank.
3.
Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
4.
Remove any mud affixed to the undercarriage.
LOCK
Always close the window.
Always lock the following places.
REMARK
Use the starting switch key to lock and unlock all these places.
(1) Operator's cab door
(2) Battery disconnect switch cover
RKA68560
MACHINE OPERATIONS AND CONTROLS OPERATION
3-158
WENAM00241