Komatsu PC490-11, Installation And Instruction Manual

Page: 241 / 492

METHOD FOR FASTENING AND UNFASTENING SEAT BELT
k k
WARNING
• Before fastening the seat belt, check that there is no problem in the belt mounting bracket or belt. If
it is worn or damaged, replace it.
• Even if no problem can be seen in the belt, replace the seat belt every 3 years from starting usage
or 5 years after manufacture whichever comes sooner.
• Be sure to use the seat belt during operation.
• Do not twist the seat belt when fastening.
REMARK
• The date of manufacture of the belt is shown on the back of the belt.
• The date indicated on the seat belt is the manufactured date. It is the start of the 5-year period. It is not the
start of the 3-year period of actual usage.
• This seat belt has a retractable device, so it is not necessary to adjust the length.
METHOD FOR FASTENING SEAT BELT
1.
Hold grip (2) and pull out the belt from retractable device
(1).
2.
Check that the belt is not twisted, and then inset tongue (3)
into buckle (4) securely.
3.
Pull the belt lightly to check that it is properly locked.
METHOD FOR UNFASTENING SEAT BELT
Press button (5) in buckle (4) and remove tongue (3) from buckle (4).
The belt is automatically wound in, hold grip (2) and return the belt slowly to retractable device (1).
REMARK
If the tongue is not inserted in the buckle of the seat belt, the
seat belt caution lamp is displayed at the left top of the ma-
chine monitor. Fasten the seat belt.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-169