Komatsu PC490-11, Installation And Instruction Manual

Page: 218 / 492

PROCEDURE FOR REFUELLING PUMP
1.
When the machine is operated on sites with no fuel container and pump, the machine may be refuelled
from fuel barrels.
The refuelling pump is located in the right hand rear pump compartment of the machine.
2.
Remove the refuel hose which is stored in tray (3) from the machine.
Unscrew the strainer valve cap (H) to open position (J).
Place the fuel hose (2) into the fuel barrel placed next to the machine.
Remove the fuel cap (F).
3.
Refuel Pump with Auto Shut-off Refuel System
Refuel switch box (1) is located on the right hand side
cooling package compartment at the rear of the machine.
Switch ON the master switch of the refuel system (4) on
the refuel switch box.
To start refuelling press switch (5) once.
9JH02623AA
3
2
-5
MACHINE OPERATIONS AND CONTROLS OPERATION
3-146