Komatsu PC45MR-30403, Operation And Maintenance Manual

Page: 442 / 475

PRESET BUTTON
If you register the desired stations to the preset button beforehand, you can select each station by touching this
button once.
It is possible to preset 6 stations each for both AM and FM.
DISPLAY SELECTOR BUTTON
Use the display selector button to change the display between frequency and clock.
Each time you press the display selector button, frequency, clock and band name are shown on the display in
this order.
While a band name is displayed, after 1.5 seconds elapsed, a frequency will be displayed again.
As long as AUX is selected, this button alternately switches the display between AUX and the clock.
SOUND CONTROL BUTTON
Press the sound control button, and the sound adjustment is ready.
Each time sound control button is pressed, BAL (Balance), TRE (Treble) and BAS (Bass) will be selected in this
order.
If sound control button is pressed while BAS is displayed, the sound adjustment will be canceled.
DISPLAY
(A): Band name, “AUX”, frequency, clock and other character/
numeric information are displayed.
(B): Frequencies are displayed at steps of 50 kHz in certain
areas.
(C): Lights up when a stereo broadcasting is heard while a FM
station is selected.
(D): Lights up at the time of balance adjustment in the sound
adjusting condition.
(E): Lights up at the time of treble adjustment in the sound ad-
justing condition.
(F): Lights up at the time of bass adjustment in the sound adjusting condition.
ATTACHMENTS AND OPTIONS HANDLE RADIO
6-25