Komatsu PC45MR-30403, Operation And Maintenance Manual

Page: 124 / 475

MAINTENANCE SCREEN SETTING
On each item of “Maintenance” menu screen, the notification
related to maintenance can be displayed and set.
The items on maintenance display are as follows.
a b
Air Cleaner Cleaning or Change -
Coolant Change -
Fuel Prefilter Change 500
Engine Oil Change 500
Engine Oil Filter Change 500
Hyd Oil Tank Breather Change 500
Fuel Main Filter Change 500
Hydraulic Oil Filter Change 1000
Final Drive Case Oil Change 1000
Hydraulic Oil Change 2000
KDPF Filter Cleaning 6000
a: Maintenance items
b: Default maintenance interval settings (h)
c: Time remaining to maintenance (h)
REMARK
When resetting the time remaining to the maintenance, keep function switch “F4” pressed for at least 1.5 sec-
onds. If time of pressing function switch “F4” is short, the function switch operating sound can be heard, but the
screen does not switch to “Maintenance Due Time Reset” screen.
• If no switch is operated for 30 seconds on “Maintenance” menu screen, the screen automatically returns to
the standard screen.
• When the maintenance time caution lamp is lit on the standard screen, press function switch “F4” on the
standard screen and “Maintenance” menu screen is displayed.
• On “Maintenance” menu screen, if the time remaining to the maintenance for any item is less than 30 hours
(initial setting value), the remaining time display (c) lights up in yellow. If the time remaining to the mainte-
nance becomes 0 hours or less, the remaining time display (c) lights up in red.
• If you want to change the setting for the maintenance time or maintenance notice time (initial setting: 30
hours), consult your Komatsu distributor.
Operations on Maintenance Due Time Reset screen
Perform the resetting of maintenance due time after starting the engine.
1.
Select the item to reset on “Maintenance” menu screen.
2.
Keep pressing function switch “F4” for 1.5 seconds or
more.
OPERATION EXPLANATION OF COMPONENTS
3-63