Komatsu PC45MR-30403, Operation And Maintenance Manual

Page: 120 / 475

AUTO IDLE STOP TIMER SETTING
NOTICE
Battery runs out faster because the only engine stops when auto idle stop function is actuated.
Actuate the auto idle stop function after a lapse of 15 minutes of running the engine at high idle and in P
mode.
The auto idle stop function stops the engine automatically when the elapsed time of idling exceeds the preset
time with the lock lever in LOCK position.
The auto idle stop function operates when the following conditions are all satisfied.
• The engine is running normally.
• The lock lever is in LOCK position.
• The engine coolant is not overheated.
• The engine is not in warm-up operation.
On “Auto Idle Stop Timer Set” screen, you can select the time to operate the auto idle stop function, or “OFF”.
Change of auto idle stop timer setting
Change the auto idle stop timer setting after starting the engine.
1.
Select “Auto Idle Stop Timer Set” on “Machine Setting”
menu screen, and then press function switch “F4”.
2.
Select the setting time on “Auto Idle Stop Timer Set” selec-
tion screen, and then press function switch “F4”.
On “Auto Idle Stop Timer Set” selection screen, it is possi-
ble to perform the following operations with function
switches “F1” to “F4”.
Function switch “F1”
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
Function switch “F2”
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
Function switch “F3”
Cancels the selection and returns the screen to “Machine Setting” menu screen.
Function switch “F4”
The screen changes to “Auto Idle Stop Timer Set” confirmation screen.
REMARK
• If you select “OFF”, auto idle stop function does not operate.
• You cannot select a time longer than that specified in the service menu.
OPERATION EXPLANATION OF COMPONENTS
3-59