Komatsu PC45MR-30403, Operation And Maintenance Manual

Page: 117 / 475

ATTACHMENT SETTING
For the machine(s) ready for installation of attachment, you can select the setting of ATT/P and ATT/E modes
from 5 patterns on “Attachment Setting” screen, or you can set it to “No Attachment”.
For each pattern on “Attachment Setting” screen, you can change its name displayed on the machine monitor.
For each pattern on “Attachment Setting” screen, you can adjust oil flow rate to the attachment corresponding to
the installed attachment.
For machines that have no attachment, “Attachment Setting”screen is not displayed.
1.
Select “Attachment Setting” on “Machine Setting” menu
screen, and then press function switch “F4”.
2.
“Attachment Setting” screen is displayed.
Select proper setting matching to the installed attachment
on “Attachment Setting” screen, and then press function
switch “F4”.
Setting of ATT/P and ATT/E mode is changed.
On “Attachment Setting” screen, you can perform the fol-
lowing operations with function switches “F1” to “F4”, “F6”,
and “F7”.
Function switch “F1”
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
Function switch “F2”
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
Function switch “F3”
Cancels the selection and returns the screen to “Machine Setting” screen.
Function switch “F4”
Allocates the selected setting to that of ATT/P and ATT/E mode, or set it to the No Attachment.
Function switch “F6”
Changes the flow rate of the selected attachment setting.
Function switch “F7”
Changes the name of the selected attachment setting.
REMARK
When “No Attachment” is selected, ATT/P and ATT/E mode is cleared from “Working Mode” screen, and you
cannot select the mode.
Changing attachment setting name
Change the name of attachment setting after starting the engine.
You can change the name of each pattern for the attachment setting as you like.
You can use alphabet letters (A to Z), Arabic numerals (0 to 9), symbols (#, *, +, -, and /), and the blank (space).
EXPLANATION OF COMPONENTS OPERATION
3-56