Komatsu PC210-11, Operation & Maintenance Manual

Page: 474 / 522

ATTACHMENT 2 VARIABLE RELIEF PRESSURE VALVE
When the attachment control function by attachment 2 is instal-
led to the machine, the attachment set pressure which has
been selected with the machine monitor will be outputted.
The pressure automatically switches according to the attach-
ment to be selected.
CONTROL PEDAL
k k
WARNING
If you perform operations with your foot on the pedal, the attachment may suddenly move if you de-
press the pedal by mistake, and this may lead to serious personal injury or death. Lock the pedal with
the lock pin when pedal operation is not necessary.
When you operate attachment, the screen will switch to the screen including bird's eye view automati-
cally.
Control pedal is used to control the attachment.
When the front, centre (neutral), and rear of the pedal are depressed, the movement of the attachment is as
follows.
Hydraulic breaker
Front of pedal (A)
Actuated
Centre of pedal (N)
Stop
Rear of pedal (B)
Stop
REMARK
Regarding other attachments, discuss with the attachment
manufacturer how the pedal and attachment operate at the
time of installation before using it.
Before start using the attachment, make sure that the attach-
ment operates normally.
LOCK PIN
NOTICE
Before changing the position of the lock pin, stop the engine.
If you depress the pedal to (D) side with lock pin at (c) position when using the breaker, it may cause
malfunction and breakage of breaker. Always put the lock pin at (b) position when using the breaker.
The lock pin locks the control pedal.
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT ATTACHMENTS AND OPTIONS
6-38