Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 440 / 458

RECOMMENDED ATTACHMENT OPERATIONS ATTACHMENTS AND OPTIONS
6–42
RECOMMENDED ATTACHMENT OPERATIONS
RECOMMENDED ATTACHMENT OPERATIONS:PC-L411-171K00A
Below described are instructions which must be followed without fail when doing the work using a hydraulic exca-
vator equipped with an attachment.
NOTICE
Select the optimum model of attachment for a hydraulic excavator on which it is to be mounted.
q
Depending on machine models of hydraulic excavator, the kind of attachments or the model of spe-
cific attachments that can be mounted will vary. Hence, consult your Komatsu distributor for the selec-
tion of optimum attachments.
HYDRAULIC BREAKER
HYDRAULIC BREAKER:PC-LG10-130K00A
APPLICABLE WORK
q
Demolition work
q
Crushing rock
q
Road construction
This attachment can be used for a wide range of applications
including demolition of buildings, breaking up road surfaces or
slag, tunnel work, rock crushing and breaking operations in
quarries.
Keep the chisel pushed perpendicularly against the impact sur-
face when carrying out breaking operations.
When applying impact, push the chisel against the impact sur-
face and operate so that the chassis rises approximately 5 cm
off the ground. Do not let the machine come further off the
ground than this amount.