Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 408 / 458

AUTOMATIC GREASE SYSTEM ATTACHMENTS AND OPTIONS
6–10
CHECK AUTO-GREASING SYSTEM
CHECK AUTO-GREASING SYSTEM:PC220_KU-Q850-280K00A
Periodic Checks
q
Check the grease level in the reservoir, but do not refill the reservoir before minimum level is reached.
q
Check the in-cab display is functioning.
q
Check if the selected interval time is correct for the working conditions of the machine.
q
Check the pump for damage and leakage.
q
Check the grease pipes for damage and leakage.
q
Check the condition of the grease points served by the system. Sufficient fresh grease should be visible.
q
Check the operation of the system. Perform a cycle test.
q
Check the pump unit and its surroundings. Attention — avoid using high pressure wash directly on the pump.
q
Replace or clean the pump filler filter behind the connector on the reservoir every 500 hours.