Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual, Page: 274 / 458

MACHINE OPERATIONS AND CONTROLS OPERATION
3–204
WHEN PARKING MACHINE
When parking machine:PC220_KU-0000-160K00A
k
WARNING
q
Avoid stopping suddenly. Stop the machine gradually.
q
Park the machine on flat hard ground.
Avoid to park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, put blocks to the track shoes. As an additional
safety measure, thrust the bucket into the ground.
q
If the control lever is touched by accident, the machine
may move suddenly, and this may lead to a serious per-
sonal accident. Before leaving the operator's compart-
ment, always set the lock lever securely to LOCK
position.
1. Set left and right travel levers (1) in the neutral position.The
machine stops.
2. Turn fuel control dial (2) to low idling position (MIN) and
lower the engine speed.